PCS1200 CPU Module Support Codesys (10
HomeHome > Products > DCS/PLC > PCS1200 CPU Module Support Codesys (10
PCS1200 CPU Module Support Codesys (10

PCS1200 CPU Module Support Codesys (10

Technical Specifications Support Codesys v3.5 SP13 Main interface and terminal definitions 1.Switch: RUN and STOP are us
Basic Info.
Model NO. SC1107N
Condition New
Customized Customized
Material ABS
Warranty 1 year
Transport Package carton
Specification 120mm(L)× 80mm(W)× 63mm(H)
Trademark Chitic
Origin China
HS Code 853710
Production Capacity 50000 pieces/year
Product Description

PCS1200 CPU Module Support Codesys (10-CH 24VDC input & 6-CH relay output) programmable logic controller PLC



Technical Specifications
Support Codesys v3.5 SP13
CPU Main parameter of electrical source
I/O10-CH 24VDC input
6-CH Relay output
Supply Voltage220VAC @50Hz
Expansion capabilityUp to 20 modules can be extended (relay module is required)Allowance range187~264VAC @50Hz
Storage capacityProgram area : 400KBMaximum current120mA
N Area : 8KB
M Area : 5KB
Output Voltage24VDC
Power loss holding area : 2KBOutput Current400mA
TimerHardware timing : 1,
0.1ms ~ 500ms
No limit on software timing (min. 1ms)
Short-circuit protection800mA,24VDC output
Counter16bitCommunication interface1*RS232, 2*RS485
Operating rate0.06μ s(Boolean operation instruction)1*RJ45
Interrupt input4 Communication protocolSerial MODBUS RTU protocol, custom protocol
Analog potentiometer2 ,0~255MODBUS TCP, 4 Server links
Input ChannalOutput Channal
Type of inputP/M-lesendType of outputRelay
Input signalRated voltage 24VDCOutput signalRated voltage 24VDC
or 24 ~ 230VAC
0 ~ 30V DC5 ~30VDC
or 5 ~ 250VDC
Input signal (ON)15~30VDC and
> 3 mA
Common terminal output current summation< 5A
Input signal (OFF)0~5VDC and
< 1mA
Output contact capacity2A, Impedance load
Input delay< 0.6ms (Rated input voltage)Switch delay< 10ms
Isolation methodOptoelectronic isolationThe isolation voltage between the coil and the contact3000V AC, 1min, leak current 1mA
Isolation of pressure1000VDCIsolation voltage between contacts750V AC, 1min, leak current 1mA
Mechanical life of relayWithout load, it can reach more than 10,000,000 times;
Rated resistance 2A load, up to more than 100,000 times
Dimensions and MountingWork Environment
Dimensions120mm(L)×80mm(W)×63mm(H) Operating temperature0 ~ +55ºC
Weight380gStorage temperature-40 ~ +70ºC
Way to install35mm DIN railRelative humnidity5% ~ 95% Noncondensing
Panel mounting type

Main interface and terminal definitions

PCS1200 CPU Module Support Codesys (10-CH 24VDC input &amp; 6-CH relay output) programmable logic controller PLC


1.Switch: RUN and STOP are used to control the 2107N program to RUN and STOP. If the RS232 interface communication parameter of PCS1200 PROGRAMMABLE logic controller is modified, the program can only be downloaded by dial STOP.2.Ethernet communication interface: RJ45 interface, which can be used for communication with touch screen, upper computer, cloud server, etc., supports MODBUS TCP protocol, and links four clients simultaneously.3.Indicator light: RUN, COM and ERR are respectively used to display module operation, communication and fault status; I and Q are respectively used to indicate input and output status of each channel; ETH, C1 and C2 are respectively used to indicate communication status of A1B1, A2B2 and Ethernet interfaces (flashing indicates data receiving and receiving at corresponding interfaces).4.RS232 communication interface: This interface is terminal wiring, which can be used for 2107N program download, communication with touch screen, upper computer, etc. It supports MODBUS RTU/ custom protocol, instruction library is RS232.lib;5.RS485 communication interface: Two interfaces can be used to communicate with touch screen, upper computer, third-party instrument, etc. MODBUS RTU/ free protocol is supported. Instruction library is RS485. Lib and RS4853.lib respectively.6.Module input terminal: it is composed of common terminal 1M and input point I, and the source/leakage connection method can be adopted.7.24VDC power supply outside the module: VO+ and VO- are the positive and negative terminals of 24VDC respectively;8.Extension interface: This interface is the base for inserting pin, which can be used to extend RPC2000 series extension modules;9.Module power supply: L, N, GND respectively are the fire line, zero line and protective ground terminal of AC220V power supply;10.Module output terminal: it is composed of 1L power supply drive end and output point Q, and the terminal is relay output;
Terminal tag definition specification
TerminalTerminal instructionsTerminalTerminal instructions
*UndefinedA1+The positive pole of the first RS485 interface
1L Output commonB1- The negative pole of the first RS485 interface
Q0.0 Normal Output terminalA2+The positive pole of the second RS485 interface
Q0.1 Normal Output terminalB2- The negative pole of the second RS485 interface
Q0.2 Normal Output terminal1MInput common
Q0.3 Normal Output terminalI0.0Normal input terminal
Q0.4Normal Output terminalI0.1Normal input terminal
Q0.5Normal Output terminalI0.2Normal input terminal
GNDGNDI0.3Normal input terminal
NNeutral wireI0.4Normal input terminal/External interrupt input
L Live wireI0.5 Normal input terminal/External interrupt input
TXRS232 data senderI1.6Normal input terminal/External interrupt input
RXRS232 data receiverI1.7Normal input terminal/External interrupt input
GNDRS232 ground terminalI1.0 Normal input terminal
*UndefinedI1.1 Normal input terminal
CGNDRS485 interface shielding groundVO- External power supply :positive
VO+ External power supply :negative

Input channel connection mode
Output channel connection mode
About CHINT
Founded in 1984, the Chint Group provides safe, reliable and stable industrial electrical equipment and solutions for energy efficient management systems. With 30 years of development it has grown to be Asia' s largest low*voltage electrical product supplier and is the leading brand of the whole industry chain in industrial electric in Asia. With three R&D centers located in Europe, North America and China, there are also branches in over 20 countries and more than 30.000 employees in the world. CHINT provides reliable products, system solutions and services to more than 100 countries worldwide.

PCS1200 CPU Module Support Codesys (10-CH 24VDC input &amp; 6-CH relay output) programmable logic controller PLC


3 Global Research Centers: Europe, North America, Asia Pacific
6 International Marketing & Sales Area: Asia Pacific, Middle East and Africa, Europe, Latin America, North America, China
9 Manufacturing Bases: China (Wenzhou, Shanghai, Hangzhou, Jiaxing, Xianyang, Jiuquan), Thailand, Egypt, Germany
22 Logistics Centers 14 International Subsidiaries 17 Marketing Offices in China 2300 Sales Companies
About Chitic
Chrtic Control Engineering Co.. Ltd. is a subsidiary company of Chint, and a leading provider of automation & control technologies and applications in China that helps the industry customers to improve operating safety, reliability and efficiency. Chitic has series of products including PCS1800 DCS, TDCS9200 DCS and CTS700 DCS, information platform for water company, control system for high speed rapier loom, drive system of switched reluctance motor, solar energy monitoring system, computing cloud center for new energy; etc. Chitic control system won 2006 National Science and Technology Progress Awards of China, CTS700 DCS won the award of 2010 Innovative Product of China. Chitic headquarter is located at the beautiful city of Hangzhou, two hours drive from Shanghai. Chitic has its own science & technology park, Chitic Park, which covers about six thousand square meters.
Our Business Sector

PCS1200 CPU Module Support Codesys (10-CH 24VDC input &amp; 6-CH relay output) programmable logic controller PLC



Typical Reference

PCS1200 CPU Module Support Codesys (10-CH 24VDC input &amp; 6-CH relay output) programmable logic controller PLC